Notched Impact Strength Explained: Tests, Materials, and Molding Factors
Need Custom Components?
Looking for a direct China factory for plastic or hardware parts?
Your Direct China Manufacturer
In-house production for custom plastic and hardware parts.
The counterintuitive meaning of a high impact result
A common misconception is that a plastic with a high notched impact strength will automatically make a more durable part. In manufacturing, that conclusion is too broad. A notched impact test measures how a standardized specimen responds to a sudden blow when a deliberate notch concentrates stress. It is a useful comparison under defined conditions, but it does not predict every drop, collision, or service failure.

The surprising point is that the notch is not an incidental defect: it is a controlled feature designed to make crack initiation more repeatable. The result reflects the combined influence of material, specimen geometry, temperature, conditioning, and test method. A higher value can support a material choice, but the part’s shape, molding quality, and actual impact conditions still determine whether it performs reliably.
For buyers and engineers, the practical question is therefore not simply “Which resin has the highest value?” It is “Which test result, for which material grade and condition, is relevant to this part’s failure risk?” This distinction helps prevent misleading comparisons during material selection and supplier review.
What notched impact strength measures
Notched impact strength describes a material’s ability to absorb energy during a rapid fracture event in a specified test. A pendulum strikes a notched specimen, and the test system determines the energy absorbed as the specimen breaks or bends. The notch creates a stress concentration, making the test more sensitive to a material’s resistance to crack initiation and propagation than an unnotched test may be.
For plastics, results are commonly reported as energy per unit specimen width or cross-sectional area, depending on the standard and method. The reporting unit and calculation should be checked rather than assumed. A result from one standard cannot necessarily be compared numerically with a result from another, even if both are described as impact strength.
Impact behavior is also distinct from tensile strength, stiffness, and hardness. A plastic can be stiff and strong under slow loading but fracture suddenly under a sharp blow, especially at low temperature or around a notch. Conversely, a more flexible material may deform and absorb energy without breaking in the same way. The intended function and failure mode matter as much as the headline value.
Notched Izod and notched Charpy: related, not interchangeable

Notched Izod and notched Charpy are both pendulum impact methods, but they use different specimen support and impact arrangements. In a typical Izod setup, the specimen is held vertically as a cantilever and struck above the notch. In a typical Charpy setup, the specimen is supported horizontally at both ends and struck between the supports, opposite the notch. The applicable standard specifies the exact geometry, orientation, and procedure.
ASTM D256 is commonly associated with plastics Izod impact testing, while ASTM D6110 covers Charpy impact testing of plastics. ISO 180 addresses Izod impact strength, and ISO 179 addresses Charpy impact strength. These references are useful starting points, but the exact edition, specimen type, notch dimensions, and test conditions should be stated in the specification or report.
| Comparison point | Notched Izod | Notched Charpy |
|---|---|---|
| Typical specimen arrangement | Vertical, held as a cantilever | Horizontal, supported at both ends |
| Impact location | Above the notch, as defined by the method | Between supports, typically opposite the notch |
| Common plastic standards | ASTM D256; ISO 180 | ASTM D6110; ISO 179 |
| Key comparison caution | Do not treat its value as directly equivalent to Charpy | Check specimen type, notch, units, and conditioning |
The same polymer grade can produce different reported values under different methods. Even within one method, a change in specimen thickness, notch geometry, temperature, or conditioning can alter the result. When comparing supplier data, match the standard and test conditions before interpreting the number.
Factors that can change a test result
Notched impact strength is a material property measured through a controlled test, but it is not independent of specimen preparation or test conditions. A result without context can be difficult to use for a purchasing or engineering decision.
Material grade and formulation: Polymer family alone is not enough. Resin grade, impact modifiers, fillers, reinforcement, pigments, and recycled content can change fracture behavior. Confirm the exact grade and formulation status associated with the data.
Using the result to select a plastic material
Material selection should begin with the part’s impact scenario, not with a ranking table of resin values. Identify the likely impact location, direction, temperature, loading rate, and whether the component must remain functional after impact or merely avoid hazardous fragmentation. A small clip that flexes during assembly has different requirements from a housing exposed to repeated handling or an accidental drop.
Compare candidate materials using data generated under the same test standard and comparable conditions. If the application involves low temperatures, request data at a relevant temperature or plan a test program that includes it. If moisture exposure is expected, clarify whether the reported value is for dry-as-molded, conditioned, or another specified state.
Consider trade-offs rather than optimizing one property in isolation. A formulation selected for higher impact resistance may differ in stiffness, dimensional stability, surface finish, cost, or processing window. Reinforcement can improve stiffness but may also affect impact behavior, depending on the resin, fiber content, orientation, and part design. The actual grade and molded geometry must be evaluated together.
For a new component, it is sensible to use material data as a screening tool, then validate the design with representative molded samples. A standard test bar offers useful consistency, but it does not reproduce every feature of a finished part, such as sharp corners, screw bosses, weld lines, ribs, or changes in wall thickness.
How injection molding can influence impact performance
During injection molding, the polymer is melted, injected, packed, and cooled. These stages shape the part’s internal structure and can affect its response to impact. The goal is not to claim that one processing adjustment guarantees a specific impact result; it is to control the process and verify the finished component under relevant conditions.
Gate position influences the direction of material flow. Where flow fronts meet, a weld line may form, and that region can be a potential weakness if it lies in a highly stressed area. A design review should consider whether the expected impact load crosses a weld line or acts near a notch-like geometric feature.
Inconsistent filling or packing, unsuitable melt or mold conditions, and uneven cooling can contribute to variation or defects. The effect depends on the polymer and part design. For quality control, review molding conditions alongside the material lot and part inspection results rather than treating a test-bar value as proof that every production part will behave identically.
Part geometry is equally important. A sharp internal corner, thin section, abrupt thickness transition, or poorly supported feature can concentrate stress in service. Where design requirements allow, smoother transitions and appropriate radii may reduce local stress concentration. Any design change should be checked against fit, function, tooling constraints, and dimensional requirements.
A practical validation workflow
A useful validation plan links material evidence to the part’s real failure risks. It should be agreed by engineering, quality, and purchasing before results are used to approve a grade or supplier. This is especially important when a drawing or specification contains a minimum impact value without fully defining the test method.
Define the service condition: Document the impact location, direction, expected temperature range, exposure, and whether the load is occasional or repeated.
Common mistakes when interpreting impact data
One frequent mistake is comparing an Izod result from one supplier with a Charpy result from another as if they were the same measurement. Another is comparing values in different units or from different conditioning states without conversion and method review. Even a correct unit conversion cannot resolve differences in specimen geometry or test procedure.
It is also risky to rely on a single reported value without sample count, range, or failure observations. Plastics can show variation, and an average may hide occasional brittle failures. For critical parts, ask how specimens were prepared, how many were tested, and whether the report includes individual results or only a summary.
A further error is treating the test value as a direct guarantee of the molded part’s performance. A standard bar does not include every production feature. If the component has a known stress concentration or must work at low temperature, test representative parts and inspect the failure location. Results are most useful when they answer a defined engineering question.
What buyers should request from a supplier
When requesting a quotation or reviewing a material proposal, buyers can reduce ambiguity by specifying the required grade, test method, conditioning, temperature, and acceptance threshold. If a supplier submits a datasheet, check that it identifies the method and does not present a generic polymer-family value as a guaranteed production result.
For an OEM or ODM project, coordinate material approval with mold and part validation. A change in resin, color, or processing conditions can affect appearance, dimensions, and impact behavior. Agree on how changes will be documented and whether revalidation is required. This makes technical approval clearer and helps prevent late-stage disagreements about what a test result was meant to demonstrate.
At JATERSON, our manufacturing work is centered on injection-molded plastic components, hardware parts, and related OEM/ODM production. In a component project, notched impact data is one input for material and process discussions, not a substitute for confirming the drawing, intended use, test conditions, and production validation plan. Clear specifications and coordinated sample review make the result more useful to both the engineering team and the buyer.
Conclusion: use the test as evidence, not a promise
Notched impact strength helps compare plastic materials under a defined, controlled impact condition. Its value is meaningful only when the test method, specimen, notch, temperature, conditioning, and material grade are understood. Notched Izod and notched Charpy results are related forms of evidence, but they are not automatically interchangeable.
For reliable component selection, connect the test result to the part’s geometry, molding conditions, and service environment. Use standardized data to screen materials, then validate representative molded parts where the application warrants it. That approach gives buyers and engineers a more defensible basis for material approval and production control than choosing a plastic by one impact number alone.
Recent Comments (0) 0
Leave a Reply