718H Steel vs Mirror Polish for Injection Molds: Which Delivers Better Part Surface Quality?

Answered
STATUS: 20261112 · VERIFIED
DesignManufacturingQuality
Need Custom Components?

Looking for a direct China factory for plastic or hardware parts?

Your Direct China Manufacturer

In-house production for custom plastic and hardware parts.

China FactoryQuality ControlOEM / ODM Manufacturing
Discuss Your Project

I am the founder of a small independent consumer electronics brand, negotiating my first OEM cooperation with a Chinese factory for our new premium wireless charging dock product. We have a confirmed first order of 50,000 units, with projected annual total volume hitting 200,000 units if sales perform as expected. The two tooling quotes I received differ by 28% in total cost: one option specifies the full mold built with 718H pre-hardened steel, while the other uses standard P20 base steel with full mirror polish applied to all cavity surfaces.

My overseas engineering team mentioned both options can deliver the glossy finish we need for the top housing, but I don’t want to waste money on unnecessary upgrades, and I also don’t want to end up with uneven orange peel or fading gloss after 30,000 production shots. I only need high gloss on the top visible surface of the dock, the side and back areas only require fine matte texture.

Expert Insights

Expert Answer

David Zhang
David ZhangYears of service:20Customer Rating:5.0

Founder & General ManagerStart a Chat

The first critical point to clarify is that 718H and mirror polish are not two competing equivalent options: 718H is a grade of pre-hardened mold steel with 33-37 HRC hardness, while mirror polish is a multi-step surface finishing process that can be applied to all common mold steel grades. Most first-time customers mix these two variables together when evaluating tooling quotes, which leads to unnecessary cost overrun or underperformance.

The 28% price gap you see in the two quotes breaks down clearly: around 11-13% of the difference comes from the material upgrade from standard P20 to 718H, and the remaining 15-17% comes from the extra labor required to achieve full mirror polish across every single cavity and core surface. Standard P20 steel, even after full A2 grade mirror polish, will start to lose uniform gloss after 12,000-15,000 shots, as its lower 28-32 HRC hardness leads to tiny plastic flow abrasion marks that build up on the cavity surface. 718H steel by contrast, even with standard fine #1800 grit polish, can hold consistent cosmetic surface quality past 80,000 shots without extra maintenance.

If your total production volume exceeds 30,000 units, 718H base steel with selective mirror polish only on the high-gloss top surface delivers the best overall cost performance. This setup cuts out the 12-15% extra cost from polishing non-critical texture areas, while retaining the long service life of 718H steel. You also avoid the common mistake of full mirror polish on non-cosmetic surfaces like ejector pin locations or parting line zones, which adds 30% extra polishing time for zero visible benefit on the final part.

For your wireless dock project using PC-ABS blend material, 718H steel also reduces weld line visibility significantly even without full optical polish, while P20 with mirror polish often leaves subtle hidden pitting that transfers as faint uneven marks on glossy plastic parts. You can require the supplier to provide two small test coupon samples: one 718H sample polished to #1800 grit, one P20 sample with full mirror polish, and run a 50-shot production test on both to check gloss retention after simulated abrasion. This validation takes 2 extra days and costs less than 1% of your total tooling budget, and eliminates almost all post-production quality surprises.

In terms of lead time, a 718H mold with selective polish takes 12-15 days of standard tooling cycle, while full mirror polish on any steel grade adds 7-10 extra processing days. This time difference can be critical if you are targeting a pre-holiday product launch window.

Jason Zhou
Jason ZhouYears of service:9Customer Rating:5.0

Production EngineerStart a Chat

718H steel has 3-4% higher nickel and molybdenum content than regular P20, which delivers fully uniform hardness across the entire steel block even at 400mm thickness, no soft hidden spots that cause uneven polishing effects. For 50k to 200k total production runs, the total cost of ownership of 718H is far lower than P20 with mirror polish, because you will not need to schedule unplanned mid-production cavity re-polishing work.

P20 mirror polished molds typically need two full re-polish cycles after 15k and 35k shots respectively, each requiring 1-2 days of production downtime and skilled polishing labor cost, which is not factored into the initial low P20 quote most customers receive. Even if you get the P20 tooling for 28% lower upfront cost, the extra maintenance costs and production delays will erase all savings before you hit 50k total units.

Sophia Wang
Sophia WangYears of service:14Customer Rating:5.0

Engineering ManagerStart a Chat

All surface finish inspection criteria can be standardized to eliminate ambiguous quality issues. For 718H polished cosmetic surfaces, you only need to run hardness tests at three different points on the cavity and core to confirm no soft zones that lead to uneven gloss after production starts.

For mirror polish finish regardless of base steel grade, perform visual inspection under 40W fluorescent light at 60 degree angle 30cm away from the steel surface, to catch any micro scratches or tiny pitting that will transfer directly to the glossy plastic part. 2026 production data for consumer electronics cosmetic parts shows that the uneven gloss defect rate drops 22% when using properly polished 718H instead of P20 with full mirror polish, as 718H’s uniform grain structure eliminates the micro porosity that causes hidden polish defects.

Olivia Chen
Olivia ChenYears of service:6Customer Rating:5.0

Customer Project CoordinatorStart a Chat

When doing pre-machining for mold cavities, 718H’s higher rigidity lets you leave a consistent 0.03mm material stock on all cosmetic surfaces after CNC milling, which removes all CNC tool marks completely before polishing starts, so total polishing time can be cut by 20% compared to P20 that often leaves uneven 0.1mm stock due to lower material rigidity.

Standard magnetic chucks can be used for 718H machining, no custom soft jaws are required, so you avoid micro vibration marks that need extra 2-3 hours of manual polishing work to remove. The maximum achievable surface finish on properly machined 718H after 3-step buffing is A1 grade, which meets almost all consumer product high-gloss requirements, no expensive diamond buffing process is needed for most use cases.

Linda Xu
Linda XuYears of service:12Customer Rating:5.0

Tooling SupervisorStart a Chat

718H steel has a much lower thermal expansion rate under 180C standard injection temperature compared to P20, so cavity dimensions stay consistent across more than 10k consecutive production shots, the cosmetic housing parts coming out of the mold will have consistent wall thickness across the full glossy surface. This eliminates minor uneven warpage that causes tiny fit gaps when assembling the top housing to the plastic base of your wireless charger.

Parts from P20 mirror polished molds often develop subtle uneven shrinkage after 20k shots, as the cavity surface wears slightly, which leads to a 1-2% higher assembly rejection rate that adds unplanned labor cost during mass production. The consistent surface finish from 718H also removes the need for extra manual sorting to separate high gloss parts from substandard units.

Daniel Yang
Daniel YangYears of service:8Customer Rating:5.0

Sourcing & Supply Chain SpecialistStart a Chat

For full mirror polished cavities, you cannot place a direct gate on the cosmetic visible face, because the gate vestige will be impossible to remove without scratching the polished surface. But 718H’s high hardness allows you to use a hot tip gate hidden on the non-cosmetic bottom edge of the part, which leaves almost no visible vestige, and the steel’s wear resistance prevents gate drool that causes plastic residue to contaminate the mirror surface after 10k production cycles.

You also do not need to add extra vent slots on 718H molds for glossy PC-ABS parts, as its uniform fine grain structure releases trapped air more evenly, so there is almost zero risk of burn marks showing up on the polished part surface, which is a common defect on P20 mirror polished tools.

Rachel Huang
Rachel HuangYears of service:8Customer Rating:5.0

Quality EngineerStart a Chat

Full mirror polished cavity surfaces require a minimum 1.5 degree draft angle to avoid scratching the glossy finish when the part ejects from the mold, but 718H’s fine uniform grain can deliver the same required high gloss level with only 0.8 degree draft angle.

This lets you expand the visible flat cosmetic area on the top face of the wireless charging dock by 30%, no need to add a hidden stepped edge on the part to accommodate the extra draft angle required for mirror polish on P20. You can also reduce wall thickness variance by 0.2mm on 718H molds, with zero risk of sink marks that are extremely obvious and hard to hide on high-gloss mirror finish parts, which gives you more design flexibility on the final product appearance.

Michael Wu
Michael WuYears of service:13Customer Rating:5.0

Quality ManagerStart a Chat

When running mass production on 718H molds, you can set the PC-ABS melt temperature 10C lower than what is required for P20 mirror molds, which reduces residual stress inside the glossy plastic part significantly. This leads to a much lower chance of fine surface crazing appearing on the product after 6 months of end user use, a common hidden quality issue that does not show up during first article inspection.

The injection process window for 718H is around 30% wider than that for P20 mirror molds, so less experienced line operators can run stable production without easily introducing process variations that cause uneven gloss across different batches, and you do not need to run 2-3 extra trial production cycles to stabilize the polish transfer rate before mass launch.

Note: We respect all users' opinions and contributions. However, comments and answers reflect the views of their respective authors only.